Home

MOBILE
ELECTRONICS
Car Audio
Car Security
Cruises
Diagrams
Diodes
Door Locks
Glossary
Installs
Join the Club
Links
Ohm's Law
Relays
Resistors
Tools

Search
the12volt

the12volt
About Me
Email
Guest
 



the12volt.com line

Glossary

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Laser Diode - A semiconductor device which emits a laser beam.

LED - Light emitting diode.

Linearity Error - The deviation in response from an expected or theoretical straight line value for instruments and transducers (speakers).

Line Level - The standard preamplifier output level of a signal from an audio source other than a turntable. Usually between 100mV and 1V, but may be as high as 5V or more from some preamplifiers.

Liquid Crystal Display (LCD) - A type of digital display made of a material that changes reflectance or transmittance when an electrical field is applied to it.

Load - The electrical demand of a process, expressed in current (amps), power (watts), or resistance (ohms).

Local / Distance Switch - Changes the sensitivity of the tuner. When switched to local (LO), the stronger local stations are recieved with a higher image rejection. When switched to distance (DX), the weaker, distant stations are recieved but with less image rejection.

Loudness Control - Intended to boost low frequencies at lower volume levels and should not be used at high volume listening levels.

Loudspeaker - An electroacoustic transducer which converts electrical audio signals at its input to audible waves at it's output. May also refer to a given driver of a multiple speaker system and not to the whole speaker system as might a speaker.

Loudspeaker Compliance - The acoustical and mechanical equivalent of capacitance. Determines how easily a speaker cone/ voice coil assembly will move whenan electrical signal is applied to it.

Low Frequency Driver - A loudspeaker specifically designed to reproduce long, low-frequency wave lengths. The driver typically has a large cone, magnet structure, and voice coil. Woofer.

Low Pass Filter - A network of elements used to attenuate all frequencies above a predetermined frequency. Frequencies below the cutoff point pass without any effect.

Lows - Term which refers to a set of speaker components used to reproduce frequencies below 500 Hz as in a set of woofers. May also refer to the low frequency drivers of a set of separates. Not treble.


# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z




 
the12volt.com line