*All information on this site is provided "as is" without any warranty of any kind,
either expressed or implied, including but not limited to fitness for a particular use. Any
user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
1996-97 Ford Aerostar Cruise Control Wiring Information
Ignition Switch Harness or Use Hot Side of Brake
Ignition Switch Harness
Near Cruise Control Module
Hot Side of Brake
Cold Side of Brake
EDIS Module, Passenger's Fender
Driver's Firewall 104 Pin Connector Position 58 PCM
Pulses Per Mile
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above.
Rostra® Cruise Control module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.