*All information on this site is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Alarm Information • Stereo Information • View all Ford Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1995-97 Ford Ranger Cruise Control Information )

1995-97 Ford Ranger Cruise Control Wiring Information
Constant 12V+	Yellow	Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+	Green/Purple	Ignition Switch Harness
Ground	Use Chassis	Near Cruise Control Module
Hot Side of Brake	n/a	Brake Switch
Cold Side of Brake	Light Green	Brake Switch
Tach	Blue/Red or Tan/Yellow	Coil on Driver's Side
VSS Wire	Gray/Black	Passenger's Firewall 104 Pin Connector Position 58 PCM
Pulses Per Mile	8000 PPM
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above. Rostra® Cruise Control module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.

• Alarm Information • Stereo Information • View all Ford Vehicles

Search the12volt.com

Custom Search

Follow the12volt.com:

Share, print & email this page:

Friday, February 03, 2012

•

Donate to the12volt.com

•

Advertising

Basics • Car Audio • Car Security • Cruise Controls • Diodes • Door Locks • Ohm's Law • Passive Crossovers • Relays • Resistors • Subwoofer Enclosures

Application Guides • Calculators, Charts, Diagrams • Downloads/Manuals • Find Installers • Forums • Glossary • Subwoofer Wiring • Tools • Vehicle Wiring