2011 Mitsubishi Lancer EVO GSR Stereo Wiring

I have the Navigation system w/o the 9-speaker Rockford Fosgate system. My speaker wires don't seem to be the same color as the system diagrams I have seen for previous years of the GEN X. Accurate schematics of this audio system would be greatly appreciated

Does Mitsubishi routinely mix up right from left in their schematics? Anyone out there run into a similiar problem?

Any help out there?

If equipped, the amplifier is under the driver seat. On vehicles with amplifier, the speaker wires are WHITE/ blue - BLACK / YELLOW at the amplifier, white 18 pin plug, pins 8 and 18. The tweeter wires are WHITE/ blue - BLACK / YELLOW at the amplifier, white 14 pin plug, pins 6 and 14M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

2011 Mitsubishi Lancer     DirectWire 2.0 Vehicle Information Audio Item     Wire Color     Polarity     Wire Location Radio 12V     RED / white     +     radio, white 20 pin plug, pin 10 Radio Ground     black     -     radio, white 20 pin plug, pin 20 Radio Ignition     yellow or blue/red     +     radio, white 20 pin plug, pin 1 Radio Illumination     GREEN / WHITE (dimmer)     +     radio, white 20 pin plug, pin 9 Factory Amp Turn-on     pink or blue     +     radio, white 18 pin plug, pin 17 or 7 Power Antenna     pink     +     radio, white 20 pin plug, pin 14 Left Front Speaker (+/-)     WHITE/ blue - BLACK / YELLOW     +,-     radio, white 20 pin plug, pins 8 and 18 If equipped, the amplifier is under the driver seat. On vehicles with amplifier, the speaker wires are WHITE/ blue - BLACK / YELLOW at the amplifier, white 18 pin plug, pins 8 and 18. The tweeter wires are WHITE/ blue - BLACK / YELLOW at the amplifier, white 14 pin plug, pins 6 and 14. Right Front Speaker (+/-)     WHITE/ red - BLACK/ red     +,-     radio, white 20 pin plug, pins 6 and 16 If equipped, the amplifier is under the driver seat. On vehicles with amplifier, the speaker wires are WHITE/ red - BLACK/ red at the amplifier, white 18 pin plug, pins 7 and 17. The tweeter wires are WHITE/ red - BLACK/ red at the amplifier, white 14 pin plug, pins 5 and 13. Left Rear Speaker (+/-)     yellow/blue - gray/blue     +,-     radio, white 20 pin plug, pins 7 and 17 If equipped, the amplifier is under the driver seat. On vehicles with amplifier, the speaker wires are yellow/blue - gray/blue at the amplifier, white 14 pin plug, pins 1 and 7. Right Rear Speaker (+/-)     yellow/red - gray/red     +,-     radio, white 20 pin plug, pins 5 and 15 If equipped, the amplifier is under the driver seat. On vehicles with amplifier, the speaker wires are yellow/red - gray/red at the amplifier, white 14 pin plug, pins 2 and 8. Center Channel (+/-)     N/A Subwoofer (+/-)     green - yellow (1); blue - white (2)     +,-     amplifier, white 18 pin plug, pins 1 and 9; 2 and 10 If equipped, the amplifier is under the driver seat. Aux. Audio Input Left (+/-)     blu - blk (Lancer), blu/wht - blk/wht (Lancer Evo)     +,-     radio, white 18 pin plug, pins 13 and 14 Aux. Audio Input Right (+/-)     pink - black (Lancer), pur - blk/wht (Lancer Evo)     +,-     radio, white 18 pin plug, pins 4 and 14 RSE Video (+/-)     N/A RSE Audio Left (+/-)     N/A RSE Audio Right (+/-)     N/A Satellite Radio 12 Volts     RED / white or red     +     Satellite Radio Tuner, white 14 pin plug, pin 1 If equipped, the Satellite Radio Tuner is behind the glove box. Satellite Radio Ground     black     -     Satellite Radio Tuner, white 14 pin plug, pin 8 Satellite Radio Ignition     (CAN bus) Satellite Radio Antenna     (coaxial cable) Satellite Audio Left (+/-)     yellow - blue or black     +,-     Satellite Radio Tuner, wht 14 pin plug, pins 6, 7 Satellite Audio Right (+/-)     brown - blue or black     +,-     Satellite Radio Tuner, wht 14 pin plg, pins 14, 7 M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Thanks Tommy. My speaker wires don't seem to match the Direct wire, nor the factory schematic. I'm either extremely confused, or they didn't follow convention. I have installed alarm/audio/remote start systems in many different cars, and they all matched the reference material. This one doesn't, and I wondered if anyone else has run into the problem. Its easy enough to track the wires and determine the right polarity. Its just weird that even the factory manuals don't match my car. Thanks again for the reply. Mike