2008 Toyota 4Runner Alarm/RS/Keyless Wiring

Hey guys. Could you please provide me with wiring information for an 08 Toyota 4-runner. I didn't see it listed in the vehicle list. Thanks!

Steven, it's the same as an 07.  I see that an 07 isn't listed either..... so I guess I haven't helped at all. sorry

I just did an 08 4 runner and the same wire code as an 07. WIRE          COLOR          POLARITY          LOCATION      Battery          WHITE/ BLUE     (+)     IGNITION SWITCH HARNESS      Ignition 1     BLACK/ RED     (+)     IGNITION SWITCH HARNESS      Ignition 2     BLUE / YELLOW     (+)     IGNITION SWITCH HARNESS      Accessory 1     WHITE/ GREEN     (+)     IGNITION SWITCH HARNESS      Starter 1     GREEN/ BLACK     (+)     IGNITION SWITCH HARNESS      Anti-Theft Type          UNIVERSAL IMMOBILIZER      Anti-Theft Descript          THE KEY SENDS AN RF SIGNAL TO THE BCM MODULE THROUGH AN ANTENNA LOCATED AROUND THE IGNITION CYLINDER      Key Sense     GREEN/ YELLOW     (-)     IGNTION SWITCH HARNESS      Tachometer     BLACK/ WHITE     (-)     AT ECM MODULE BEHIND GLOVEBOX      ALSO IN THE DATA LINK CONNECTOR UNDER DRIVER DASH ON SOME MODELS      Speed Sense     VIOLET/RED     (AC)     AT ECM MODULE BEHIND GLOVEBOX      Parking Lights     GREEN          (+)     TOP LEFT PLUG AT FUSE BOS OR DRIVERS DOOR SILL HARNESS      Brake Lights     GREEN/ YELLOW     (+)     AT SWITCH ABOVE PEDAL OR DRIVERS DOOR SILL HARNESS      Horn          GREEN/ RED     (-)     IN HARNESS AT STEERING COLUMN      Power Unlock     GREEN          (-)     IN DRIVERS DOOR HARNESS      DOUBLE PULSE TO UNLOCK ALL DOORS      Power Lock     BLUE          (-)     IN DRIVERS DOOR HARNESS      bypass needed for anti-theft xk05 with proper firmware.      The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya