2009 Toyota Venza Alarm/Remote Start Wring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2009 Toyota Venza Alarm/Remote Start Wring (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

ricardoboston

Copper - Posts: 268

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: August 28, 2009 at 6:26 PM / IP Logged

i need a 2009 toyota venza wiring diagram ,for alarm/ remote start.

thanks .

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 28, 2009 at 6:30 PM / IP Logged

WIRE	COLOR	POLARITY	LOCATION
Battery	PINK OR BLUE	(+)	IGNITION SWITCH HARNESS
Ignition 1	RED	(+)	IGNITION SWITCH HARNESS
Starter 1	GREEN	(+)	IGNITION SWITCH HARNESS
Domelight Super	PINK	(-)	UNDERDASH FUSEBOX
LF Latch	VIOLET	(-)	AT MAIN BODY ECU
RF Latch	VIOLET	(-)	AT MAIN BODY ECU
LR Latch	RED	(-)	AT UNDERDASH FUSEBOX
RR Latch	GRAY	(-)	AT MAIN BODY ECU
Trunk Trigger	GRAY	(-)	AT MAIN BODY ECU
Hood Trigger	TAN	(OPEN)	AT MAIN BODY ECU
Alarm Disarm	GRAY	(-)	AT MAIN BODY ECU
Alarm Arm	BROWN	(-)	AT UNDERDASH FUSEBOX
Parking Lights	GREEN	(+)	UNDERDASH FUSEBOX
Low Crr Pk Lights	RED	(-)	AT MAIN BODY ECU

Test arm and disarm wire while turning key in drivers door

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 28, 2009 at 6:31 PM / IP Logged

Battery	PINK OR BLUE	(+)	IGNITION SWITCH HARNESS
Ignition 1	RED	(+)	IGNITION SWITCH HARNESS
Ignition 2	GREEN	(+)	IGNITION SWITCH HARNESS
Accessory 1	GREEN	(+)	IGNITION SWITCH HARNESS
Starter 1	GREEN	(+)	IGNITION SWITCH HARNESS
Starter 2	RED	(+)	IGNITION SWITCH HARNESS
Key Sense	BROWN	(-)	IGNITION SWITCH HARNES
Tachometer	GRAY	(AC)	AT DATA LINK CONNECTOR UNDER DASH
Speed Sense	VIOLET	(AC)	BRAKE ACTUATOR ASSEMBLY
Parking Lights	GREEN	(+)	UNDERDASH FUSEBOX
Low Crr. Pk Lights	RED	(-)	AT MAIN BODY ECU
Brake Lights	LIGHT GREEN	(+)	AT SWITCH ABOVE BRAKE PEDAL
Reverse Lights	GREEN	(+)	IN HARNESS IN DRIVER KICKPANEL TO REAR
Horn	YELLOW	(-)	IN HARNESS AT STEERING COLUMN
IMO	BROWN	(DATA)	AT ECM MODULE
IMI	GREEN	(DATA)	AT ECM MODULE

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: August 29, 2009 at 10:16 AM / IP Logged

thank you for your time . also i need to find out with bypass i shoud use for this car,xk05 its good one?

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: August 29, 2009 at 8:46 PM / IP Logged

sorry but im having one problem on bypasskit [xk05]they re asking for get connected the gauge wires on 2 diferent connectors and in your diagram says IGNITION SWITCH HARNESS the location for ign 1 ign2 starter1 starter2 acc,if you have done this car before or have any tips please thanks

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: August 30, 2009 at 1:45 PM / IP Logged

hello friend it is possible for you to post the notes for this diagram ?again thanks 2009 toyota venza

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 30, 2009 at 2:18 PM / IP Logged

sorry I have no info on the bypass. The last alarm I actually installed had a keyswitch mounted on the fender.

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: August 31, 2009 at 8:24 PM / IP Logged

has anyone done a remote starter/alarm on 2009 toyota venza? my question is the gauge wires acc ign1 ign2 12v start on this vehicle they re connected like the other cars on ignition switch harness or another location ?about the bypass any idea with one?i got a wiring diagram but its not complete .ill need one complete with notes please cause i need more info THANKS

ajstetler

Copper - Posts: 94

Joined: October 31, 2008

Location: Illinois, United States

Posted: August 31, 2009 at 11:31 PM / IP Logged

http://xpresskit.com/product.aspx?prodid=PKALL&make=Toyota&model=Venza&year=2009

Use a DMM if you don't have a complete list of wire colors. No different than any other Toyota.

Big Al

ricardoboston

Copper - Posts: 268

Joined: May 11, 2009

Location: Massachusetts, United States

Posted: September 03, 2009 at 5:19 PM / IP Logged

this wiring diagram its from DEI?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.