delay 12v pulse kawasaki er6 n 2006

Home / the12volt's Install Bay / Motorcycle Electronics / delay 12v pulse kawasaki er6 n 2006 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

jagadeesh

Member - Posts: 17

Joined: August 06, 2012

Location: India

Posted: September 04, 2012 at 10:40 PM / IP Logged

enoxos,

The way this alarm is designed for the remote start uses a two step procedure.

Namely, you press the start button once, wait a bit to go thru the procedures of testing the EFI (everything should be powered at this stage, except the start motor) and then you press the start button again and the bike starts.

-exactly same things happen in my bike. To switch off bike I need to press unlock button in the remote fob.

-do any body stretch the length of starter pulse, because I nee to keep press gasoline to start.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

delay 12v pulse kawasaki er6 n 2006

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.