2003 Ford Focus Radio Wire Harness?

I am having a heck of a time finding the right wire harness for my car.  I have a 2003 Ford Focus ZX5 with the 6 disc in dash cd changer.  I have purchased several harnesses and none have fit this car.  I am including a picture of the plugs on the back of the radio in hopes someone knows what this needs.  Thank you everyone.

Metra part # 70-1770

I actually bought those but the tabs that come off the stock plugs don't fit.  Do I need to remove them?

Shouldn't, I've used the UK version (looks the same of course) literally 100s of times over the last 20 years. They are all made by, Amp/Tycho, Molex or Kramm.

The Metra picture again at first glance looks like the reverse or female, i.e. the car side. OK, think I have the answer, just played with both ends from my bits box and they fitted together fine. I have one end probably from a Bluetooth kit adaptor that looks suspiciously like your photo and I just plugged the standard head unit adaptors in with no problems. Meanwhile there were two power plugs but they looked similar, 7 0f 9 (Star Trek?) and 8 of 9 pins fitted the later version had 2 grounds. For your interest these are the pin-outs going left to right starting with the top, black power plug:- Antenna rem + Gnd. Mute??? Illumination ACC Gnd. 12V+ constant. Lower yellow speaker plug:- Front left + Ditto - Rear left + Ditto - Front right + Ditto - Rear right + ditto -. If you PM me with your email address I'll send you the photos.

Here is the Harness I purchased:

And here are the plugs again from the Focus

Hope this explains why I am having an issue. 

I did some digging and found that the part I got is part number FD5940, I checked into the 70-1770 and found it also has a part number of FD5000, So I am thinking I got the wrong harness.  Thanks everyone for your help

I think the only difference is that one has two grounds and the other one. It makes no difference.

The loom shown is a Japanese car radio to Euro ISO plugs for an aftermarket car radio, it certainly isn't OEM especially with that Scotchlok on it. Most of the connectors are made by AMP-Tycho, Molex or Lucas.

I am having this exact same problem. What's the part # of the harness required to fit that? Please and thank you