the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cx2300 a remote start alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
rc200 
Member - Posts: 14
Member spacespace
Joined: August 26, 2005
Location: France
Posted: March 14, 2014 at 4:31 AM / IP Logged  
You can also intercept the starter signal coming from the key but I preferred to intercept the fuel pump power supply.
200sx, 300zx, S4.
Carvox CX2300a mods:
_RF range extended (>5kms)
_interfaced with GPS106B tracker
_hacked
ianne 
Member - Posts: 2
Member spacespace
Joined: October 15, 2014
Location: Saskatchewan, Canada
Posted: October 15, 2014 at 10:02 PM / IP Logged  
tegonfire wrote:
Hey seriously I read every post and no one really seem to know how to plug the remote start on a cheap carvox....Door lock and shock sensor and stuff is pretty very easy...
But what about the Starter killer relay...
First of all with the chinese doodie carvox remote starter you have to cut you crank starter wire in half from the engine bay.
(that mean you cannot start/crank the car with the original key anymore and the only way to crank its with the remote key.)
Why no body here talk about the killer relay( 85 is easy its pluged to ignition, 86-pin1 of harness H3-->this is a ground actived by remote key that power the relay coil so that 30 let pass the +12 to 87 that is wired to the starter(the starter wire that you cut in half)
SO that mean no body in this forum ever talked for real about the stupid carvox install manual that dont tell at all where to take the +12 for 30 of the killer relay...
Carvox manual also dont tell where to plug the pin 3 of H1 harness
it only say Pin 3 purple wire(starter output+) connect to starter wire
So you have to understand alone that you have to cut in half your starter wire then pass 1 big wire from engine bay to inside car to relay 87 and to starter wire and also plug an other wire the pin 3 wire of H1 ..
That mean you have 2 wire going into the wire of the starter so its kind of a real strange 2 to 1 wire that doesnt look good...
So after installing carvox 2 way kit the neutral safety switch dont work no more and you cannot crank using the key no more...
Why no body ever talk about that and the killer relay but there is 9 page???
To much scrap here just like cheap Cardox manual
cx2300 a remote start alarm - Page 10 -- posted image.
sorry for spamming but would you mind sending me a clear copy of this diagram pls? tia
Page of 10

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer