the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 honda crv starter/alarm aux?


Post ReplyPost New Topic
< Prev Topic Next Topic >
kennyd. 
Copper - Posts: 56
Copper spacespace
Joined: March 30, 2012
Location: Manitoba, Canada
Posted: October 24, 2013 at 5:29 AM / IP Logged  
Okey so I've looked at the install manual, and I was wrong it does say "latched" for aux 1, aux 2, aux 3 , and aux 4. I have to program it for option 2 to get it at the latched setting.
Yellowcake, can I also do the same thing to the heated seats???
Would this be a negative output wire or positive???
Thank you yellow cake!!! And smokeman!!!
yellow_cake 
Copper - Posts: 178
Copper spacespace
Joined: December 01, 2011
Location: Saskatchewan, Canada
Posted: October 24, 2013 at 8:28 PM / IP Logged  
Left Front Heated Seat: green --- (+)latched --- seat heater switch, gray 10 pin plug, pin 10
Right Front Heated Seat: GREEN/ red --- (+)latched --- seat heater switch, gray 10 pin plug, pin 5
You may have both seats turn on with the same aux -or- have an individual aux for either seat.
Either way you will need 2 relays to convert the polarity to (+).
yellow_cake 
Copper - Posts: 178
Copper spacespace
Joined: December 01, 2011
Location: Saskatchewan, Canada
Posted: October 24, 2013 at 9:43 PM / IP Logged  
Made a diagram for either case. Be sure to use diodes; either across pin 85 & 86 of the relays, or inline on the AUX wires.
06 honda crv starter/alarm aux? - Page 2 - Last Post -- posted image.
kennyd. 
Copper - Posts: 56
Copper spacespace
Joined: March 30, 2012
Location: Manitoba, Canada
Posted: October 26, 2013 at 6:55 PM / IP Logged  
Thank you very much yellow cake. Now I'm ready to install this next week.
I have another question that is unrelated, so I have a fm remote fob from another older car strter and alarm, can this be programmed to my newer FM remote car starter and alarm, I was reading my owners manual to program the remotes, and it accepts up to 4 remotes.
I was just wondering if anybody has tried this?
yellow_cake 
Copper - Posts: 178
Copper spacespace
Joined: December 01, 2011
Location: Saskatchewan, Canada
Posted: October 26, 2013 at 7:13 PM / IP Logged  
If it's of a different company than most likely it won't work.
If it's made by the same brand/company, it might work. If the FCC id matches to the one on the new remote, it will work for sure. Aside from that, you won't know till you try.
yellow_cake 
Copper - Posts: 178
Copper spacespace
Joined: December 01, 2011
Location: Saskatchewan, Canada
Posted: October 26, 2013 at 7:22 PM / IP Logged  
Also in the diagrams above, you can grab the +12v sources straight from the heater switches. Each switch will have a power wire that become +12v when the ignition or accessory is on.
Make sure that the wires you use are of at least the same thickness as the ones you will connect to in the seat switch harness. They won't be crazy thick, somewhere around 16 or 18 gauge most likely. I emphasized those ones in the diagrams as the thicker wires.
kennyd. 
Copper - Posts: 56
Copper spacespace
Joined: March 30, 2012
Location: Manitoba, Canada
Posted: October 26, 2013 at 8:01 PM / IP Logged  
Okey thanks again yellow cake! I'll post back on my progress...
kennyd. 
Copper - Posts: 56
Copper spacespace
Joined: March 30, 2012
Location: Manitoba, Canada
Posted: August 18, 2014 at 8:01 AM / IP Logged  
Hey guys so just yesterday I started to install the car starter/alarm.
I was supposed to install it last year but didnt get a chance to!
But now Im having difficulty locating some wires?
Heres what I need help with?
2006 honda CRV
Parking lights (+),...........wiring diagram expalins the location is at the back of the fuse box top middle plug. This wire seems really difficult to get to???
Another wiring diagram tells me I can also use 18 pin plug, pin 15 at the front of the fuse box? Would this wire work?
Door trigger wire (-)........Green, and light green (diode isolate both wires)
The location of the wires says that it is located at the factory alarm plug (green) to the left of the steering column, I cant seem to find this wire?. There is a green plug under neath the turn signals but the wires are of a different color?
Lock and Unlock wire (-) and trunk release (2 wires) do these wires need a relay?
These are type B wires?
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer