the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2012 chevy traverse

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2012 chevy traverse (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
naresh1912 
Member - Posts: 16
Member spacespace
Joined: December 05, 2008
Location: Ontario, Canada
Posted: March 01, 2014 at 10:19 AM / IP Logged  
hey guys having problem 2012 traverse not cranking put a 9.6k resistor on the starter white wire and still don't crank is there something im diund wrong help please
Chris
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: March 01, 2014 at 1:36 PM / IP Logged  
Need to know what you are doing? Remote starter? With what bypass?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: March 01, 2014 at 9:42 PM / IP Logged  
It's a little more than just the one resistor.  Does your ignition wiring set-up look like DEI TechTip 1605 that is included in this
ZIP file ?   https://www.the12volt.com/installbay/file.asp?ID=1080
Soldering is fun!
naresh1912 
Member - Posts: 16
Member spacespace
Joined: December 05, 2008
Location: Ontario, Canada
Posted: March 02, 2014 at 2:57 PM / IP Logged  
its remote srart prostart 3471tw with fortin evo-all
Chris
kreg357 
Platinum - Posts: 7,783
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: March 02, 2014 at 8:45 PM / IP Logged  
No resistor needed when using the Fortin EVO-ALL.  Flash the EVO-ALL with the correct / recommended firmware version and
follow the Connection 6 install diagram.
Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer