the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2011 camry and viper 5706v


Post ReplyPost New Topic
< Prev Topic Next Topic >
thrue1 
Copper - Posts: 77
Copper spacespace
Joined: December 09, 2008
Location: Illinois, United States
Posted: March 23, 2014 at 3:14 PM / IP Logged  
So what you are saying that toyota camry 2011 has a hood pin already from factory and I don't need to install one that is given in viper 5706v?
I can just join viper 24 harness pin 9 to 25 pin plug pin 2? Is it NO or NC
howie (aka: harryharris)
Silver - Posts: 355
Silver spacespace
Joined: February 17, 2014
Location: Florida, United States
Posted: March 23, 2014 at 4:04 PM / IP Logged  
Couldn't you even look and check?
Test before boxing up.
thrue1 
Copper - Posts: 77
Copper spacespace
Joined: December 09, 2008
Location: Illinois, United States
Posted: April 06, 2014 at 1:11 PM / IP Logged  
Hi
I just started wiring: removed panel and the airbag bracket; did not unplug the airbag connectors
Where is this hood pin wire?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: April 06, 2014 at 1:44 PM / IP Logged  
I am definitely not reading thru these 7 pages to find out, but unless it's an SLE Camry it does not have a hoodpin switch from the factory.
Mike M2
Tech Manager
CS Dealer Services
thrue1 
Copper - Posts: 77
Copper spacespace
Joined: December 09, 2008
Location: Illinois, United States
Posted: April 06, 2014 at 2:40 PM / IP Logged  
There does not seem any place to get through the fire wall? To place the siren? And the provided hood pin wires?
I was advised not to use the factory siren, now how to get through the fire wall?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: April 06, 2014 at 3:13 PM / IP Logged  
If there isn't a visible factory grommet, drill a hole where the clutch pedal would be....
Mike M2
Tech Manager
CS Dealer Services
thrue1 
Copper - Posts: 77
Copper spacespace
Joined: December 09, 2008
Location: Illinois, United States
Posted: April 08, 2014 at 7:58 AM / IP Logged  
Success!
All done car works fine.
Page of 7

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer