the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Radio Wiring for 2007 Cadillac Escalade EXT


Post ReplyPost New Topic
< Prev Topic Next Topic >
jeffmcdowell 
Member - Posts: 24
Member spacespace
Joined: February 26, 2014
Location: Kentucky, United States
Posted: March 11, 2014 at 10:54 PM / IP Logged  
Would like to have the wiring layout for 2007 Cadillac Escalde Ext radio. Need to know what wire would best be used as accessory wire and channel wires to convert to RCA for subwoofer addition. As always Thanks in advance!
Jeff
Jeffery
jeffmcdowell 
Member - Posts: 24
Member spacespace
Joined: February 26, 2014
Location: Kentucky, United States
Posted: March 11, 2014 at 11:03 PM / IP Logged  
Nevermind. Found it.
Jeffery
jeffmcdowell 
Member - Posts: 24
Member spacespace
Joined: February 26, 2014
Location: Kentucky, United States
Posted: March 11, 2014 at 11:04 PM / IP Logged  
2007 Cadillac Escalade Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power.
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Yellow
Car Stereo Dimmer Wire: Yellow
Car Stereo Antenna Trigger: White
Car Stereo Amp Trigger Wire: White
Car Stereo Amplifier Location: Located under the center console (towards the rear).
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
Jeffery
jeffmcdowell 
Member - Posts: 24
Member spacespace
Joined: February 26, 2014
Location: Kentucky, United States
Posted: July 31, 2014 at 8:59 AM / IP Logged  
Does anyone have the vss and reverse wire connector/location/color for the back of the radio?
Jeffery
jeffmcdowell 
Member - Posts: 24
Member spacespace
Joined: February 26, 2014
Location: Kentucky, United States
Posted: August 04, 2014 at 3:55 PM / IP Logged  
For specific reasons I need to use a 556UW and I was wondering if anyone knows the wiring color information for the transpoder ring and if it is possible to wire in or if I will need to use the included loop?
Jeffery

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer