the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

avital 4x03 remote start, 98 lexus gs400


Post ReplyPost New Topic
< Prev Topic Next Topic >
kastenbm 
Member - Posts: 19
Member spacespace
Joined: March 18, 2014
Location: South Carolina, United States
Posted: October 17, 2014 at 2:14 PM / IP Logged  
Ok, it's been a while but I'm having trouble with the remote start again. It was working fine, I unplugged it to move it and after plugging back in..no go! It registered the rpm at idle, and it's getting power from both constant 12v wires, but it's not putting out any voltage to ign, acc or starter outputs. Need some help please....
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: October 18, 2014 at 10:37 AM / IP Logged  
Using a transponder bypass? If so which one and how is it wired?
You have reverified your connections and made sure everything is in the right place?
What does it do when you try to remote start it? Does the unit respond to the remote? If not reprogram the remote to the unit.
Have you checked voltages coming in on both 12v inputs?
kastenbm 
Member - Posts: 19
Member spacespace
Joined: March 18, 2014
Location: South Carolina, United States
Posted: October 21, 2014 at 4:34 PM / IP Logged  
OK! FINALLY GOT IT! My neutral safety switch wire for remote start harness was not getting good enough ground.
Page of 4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer