viper 5706v remote issues

Home / the12volt's Install Bay / Car Security and Convenience / viper 5706v remote issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

reesycup

Member - Posts: 2

Joined: April 07, 2014

Location: North Carolina, United States

Posted: April 07, 2014 at 8:34 PM / IP Logged

So I saw the new Viper 5706v online and had to have one. Being an installer for 10 years I thought this upgrade would be easy. After I had completed the install on my truck everything works. However the remote will send the command, the alarm will complete the command, but instead of confirming the command the remote beeps and icon flashes like it is out of range. I have deleted and re-paired the remote but it still does the same stuff. I called DEI but since my shop is no longer a Viper dealer they will not help. Guidance please......

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: April 07, 2014 at 9:09 PM / IP Logged

Try disconnecting the power to the 5706 brain for 10 minuets or so. Pull the fuse on the red 12 volt of the 6 pin harness. See if that clears up the issue.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

howie (aka: harryharris)

Silver - Posts: 355

Joined: February 17, 2014

Location: Florida, United States

Posted: April 07, 2014 at 11:44 PM / IP Logged

Not sure if you're upgrading from an 04 series but if that's the case, please note:-

Different antenna AND antenna lead, change both.

Tell me about it, luckily I bench tested my first a while back.

Otherwise follow Smokeman's advice.

Test before boxing up.

Back to Top

reesycup

Member - Posts: 2

Joined: April 07, 2014

Location: North Carolina, United States

Posted: April 08, 2014 at 6:30 PM / IP Logged

I changed everything as I was going from an avital system to this viper.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5706v remote issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.