Wiring for Hidden Compartment?

Home / the12volt's Install Bay / General Discussion / Wiring for Hidden Compartment?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bigjohnny

Copper - Posts: 293

Joined: September 23, 2008

Location: Ontario, Canada

Posted: June 04, 2014 at 1:19 PM / IP Logged

Hello all, it's been a while since I've been around but I got reading some stuff after a buddy asked me for help automating a hidden compartment he has on his car.

I got reading about Alfred Anaya and his "traps" and wondering how he did it electrically.

it used relays, so is it as simple as using the desired input (two window switches as the basic) to power the coils of two relays, with their contacts wired in series so that both buttons are needed to be pressed for their to be continuity through the contacts?

I mean, given how technical his designs were, it couldn't be as simple as that could it?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.