autowatch car alarm remote programing

How do I program a new remote to a 276 autowatch alarm.? i have programed a new remote to a autowatch 446 before and it was quite easy with the ignition .when you switch the ignition on while the immobiliser is active the movement sensor light will stay on. But it doesn’t do the same with the 276 autowacth. when you switch the ignition on while the immobiliser is active the light keep flashing, can anyone tell me how to program a new remote to this module. Mr signal

Again it's a product made in South Africa, as I've already told you contact Conlog. The only person on this site who's even heard of them is me.

Appologies thank you.Mr signal

Hi There, Autowatch is a product from South Africa, is manufactured by PFK Electronics and you can get them here: http://autowatch.pfk.co.za/contact_us/head_office.htm The product in question cannot be programmed the same way as with the 446RLi. You will need the 5 Digit code on a sticker inside the box, send it to PFK and then - with a new solder-able remote - solder in the new code. Fitment Centre