the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5701 98 camry


Post ReplyPost New Topic
< Prev Topic Next Topic >
jhcrazyboi 
Member - Posts: 2
Member spacespace
Joined: August 05, 2012
Location: California, United States
Posted: July 16, 2014 at 5:29 AM / IP Logged  
How do you wire up the remote start harness on this car? Do you have to use the flex relay? if you have to use the relay, How so i go about wiring it up?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 16, 2014 at 7:28 AM / IP Logged  
What exactly are you asking?
Could I suggest you research the archives here, "Vehicle Wiring" or "Downloads/Manuals" sections then ask away.
The way you phrased your posts does suggest you are asking for someone here to effectively do it for you.
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: July 16, 2014 at 11:24 AM / IP Logged  
The flex relay is no different than any other typical 5 pin automotive relay so if you know/understand an auto relay you can apply that knowledge to the flex relay. The "flex" part in flex relay is the module can be programmed to use that output for various output types. The flex relay typically can be an ignition, accessory, or starter output and all that's needed to configure any of the three choices is programming so it's quite FLEXible.
In addition to researching the vast info on this site, you could also check out various other owners/installation manuals for other brands and/or models of remote start. Crimestopper and Bulldogsecurity both target a more consumer DIY market and as such their manuals are easier for the uninitiated to understand. The viper brand while obtainable by the DIY consumer was never intended to be obtained that way. It was and is intended to be sold by dealers who will install it for the customer, the installers at the dealer don't need detailed beginner level instructions because they work with the products daily and are trained and experienced in them. That's not to say a DIY'er can't install a viper, only that if you can't decipher the manual there are other more educational manuals out there to peek at and learn from.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer