viper 5906v, 2013 wrx sti

Home / the12volt's Install Bay / Car Security and Convenience / viper 5906v, 2013 wrx sti (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page Next Page > < Prev Topic Next Topic >

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 7:35 AM / IP Logged

Oh... I see interesting.. the best and safest way to do it is using 2 diodes per relay as shown above except I will be using the second relay for the clutch instead of the 2nd ACC.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 7:43 AM / IP Logged

Quite right.

Back to Top

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 7:52 AM / IP Logged

You are awesome...

One more question.. Should I be using the Green heavy gauge wire for the starter and separate the wire for the starter kill feature or is that unnecessary?

Thank you so much..

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 7:53 AM / IP Logged

Entirely up to you. As long as you make a good soldered joint it's worth while as extra security.

Back to Top

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 7:56 AM / IP Logged

Yeah because at that point the starter wire is completely cut..

Your awesome.. Thank you so much.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 7:59 AM / IP Logged

Best of luck. What bypass?

Back to Top

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 8:07 AM / IP Logged

I have to idatalink alca modules.. One for the door locks and one for the transponder bypass. I was planning on going D2D with the Door locks one.. hope that works.

Hey should I be using SPST or SPDT relays?

Back to Top

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 8:08 AM / IP Logged

two***

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 8:10 AM / IP Logged

Use the modules, easier, But go W2W it's more reliable.

Back to Top

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 8:12 AM / IP Logged

howie ll wrote:

Use the modules, easier, But go W2W it's more reliable.

If you say so I will.. W2W it is.

What about the Relays? Which type should be used for this application.

Back to Top

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.