viper 5906v, 2013 wrx sti

Home / the12volt's Install Bay / Car Security and Convenience / viper 5906v, 2013 wrx sti (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 8:27 AM / IP Logged

Easiest, standard automotive Bosch/Tycho cube, 5 pins more readily available.

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 8:41 AM / IP Logged

So this SPST relay is fine?

http://www.radioshack.com/product/index.jsp?productid=3020762

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 11:43 AM / IP Logged

Since the idatalink wants to tie into ignition.. Do I have to tie it into the second ignition too?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 11:46 AM / IP Logged

No. Follow the diagram.

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 12:52 PM / IP Logged

It doesn't specify much.. just says ignition. I got the diodes and relays.. about o start wiring some stuff up now.

catback

Silver - Posts: 703

Joined: August 13, 2002

Location: Canada

Posted: July 26, 2014 at 1:46 PM / IP Logged

The diagram should specify to what the wire connects whether it be the car or the alarm/remote starter

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 4:26 PM / IP Logged

Do any of you guys know where on the remote start wiring I can find the Trunk and Door status that the bypass module is looking for?

I have the 5906v wiring on page 1 first message.

Here is the bypass module wiring..

viper 5906v, 2013 wrx sti - Page 4 -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 4:31 PM / IP Logged

Doors to green on H2, trunk to blue on H2.

To be honest if you have to ask questions like that you shouldn't be doing this.

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: July 26, 2014 at 4:36 PM / IP Logged

howie ll wrote:

Doors to green on H2, trunk to blue on H2.

To be honest if you have to ask questions like that you shouldn't be doing this.

Well I thought the same.. but look at the iDL guide.. it says Trunk and Door Status Input... I would assume that I would need a Trunk and Door Status output..

Blue says Trunk Pin.. Green says - Door Input.. Just want to double check.. This is my first remote start.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 26, 2014 at 4:40 PM / IP Logged

Ok but I should have realised that these units are made for professional installers and the instructions assume a certain level of competence so fair enough.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.