the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5706v, 2010 Hyundai Elantra


Post ReplyPost New Topic
< Prev Topic Next Topic >
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: July 27, 2014 at 7:43 PM / IP Logged  
Hello,
I want to install a Viper 5706v alarm on my Hyundai Elantra 2010,
I have purchased the following items:
1.     Viper 5704v Full Feature Car Alarm with Remote Start and 2-way Pager
2.     DBALL2Pro
3.     Directed Electronics Inc XKLOADER2 XpressKit
I have already flashed the DBALL2Pro for Hyundai Elantra 2010(I have checked all available options in “Standard install” configuration) but I have difficulties in understanding how to wire the Viper 5707v with DBALL2Pro and with my car, i will attach the 3 devices wiring diagrams
I would be grateful if someone can help me to figure out the right installation ( step by step)
thank you in advance.
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: July 27, 2014 at 8:39 PM / IP Logged  
wissam1981 wrote:
I have difficulties in understanding how to wire the Viper 5707v with DBALL2Pro and with my car
Ax the DBALL2Pro and pick up a DBALL2, things will appear clearer then (with the install guides and interconnecting).
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: July 28, 2014 at 4:56 PM / IP Logged  
what you mean, can you explain more, and if you can show me how to connect the wires
thanks for your reply
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 28, 2014 at 5:21 PM / IP Logged  
DB-ALL PRO is the wrong unit for that alarm and your vehicle it should be a DB-ALL2.
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: July 29, 2014 at 2:20 AM / IP Logged  
What he ^ said...The DBALL2Pro is a all in one type unit it doesn't interface with the 5704v where-as the DBALL2 does. If you want to keep the DBALL2Pro then you need to get a MC501 and ax the 5704v.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 29, 2014 at 4:05 AM / IP Logged  
Go to Xpresskit, look up your car type 2 I believe only about 5 wires to DB-ALL 2 plus a few from the 5704.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: July 29, 2014 at 7:55 AM / IP Logged  
catback wrote:
What he ^ said...The DBALL2Pro is a all in one type unit it doesn't interface with the 5704v where-as the DBALL2 does. If you want to keep the DBALL2Pro then you need to get a MC501 and ax the 5704v.
thanks for your reply,
I have some questions,
1- i will return the DBALL2Pro cause i can't find and purchase the (MC501) online
2- i will purchase the DBALL2 depending on your advise ( http://www.amazon.com/Directed-Electronics-Inc-DBALL2-Channels/dp/B00H2PHSY2/ref=sr_1_1?ie=UTF8&qid=1406637447&sr=8-1&keywords=DBALL2 )
3- should i keep the ( Directed Electronics Inc XKLOADER2 XpressKit ) ? for flashing the DBALL2 or No need it any more ?
4- any another advise or cables i will need it for this installation?
5- can any one provide the Viper 5704v Wiring Diagram ?
thanks in advance.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 29, 2014 at 9:29 AM / IP Logged  
2) Yes.
3) No if the vendor flashes it for you.
4) From your questions, have it installed professionally.
5) Should be on this site, Downloads/Manuals section or the re3ady reference sheet.
5204 5704 5904/6 are all the same.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: July 30, 2014 at 12:32 PM / IP Logged  
howie ll wrote:
2) Yes.
3) No if the vendor flashes it for you.
4) From your questions, have it installed professionally.
5) Should be on this site, Downloads/Manuals section or the re3ady reference sheet.
5204 5704 5904/6 are all the same.
Hello,
i appreciate your help, i have last request i hope you can help with
i need to show me how to wiring according to the diagrams below
Hyundai Elantra
Viper 5706v, 2010 Hyundai Elantra -- posted image.
DBALL2 Type 2 Diagram
Viper 5706v, 2010 Hyundai Elantra -- posted image.
Viper 5706v
Viper 5706v, 2010 Hyundai Elantra -- posted image.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: July 30, 2014 at 12:35 PM / IP Logged  
howie ll wrote:
2) Yes.
3) No if the vendor flashes it for you.
4) From your questions, have it installed professionally.
5) Should be on this site, Downloads/Manuals section or the re3ady reference sheet.
5204 5704 5904/6 are all the same.
Please if you can in details( step by step)
thank you
Page of 22

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer