the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5706v, 2010 Hyundai Elantra


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 26, 2014 at 9:23 AM / IP Logged  
No idea, sorry.
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: August 26, 2014 at 9:33 AM / IP Logged  
wissam1981 wrote:
just last question, what is percentage % of DBall2 to work with my vehicle ???
The same percentage/odds that your 2010 elantra is a 2011 model.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 26, 2014 at 9:36 AM / IP Logged  
Ha Ha! Just try it and we'll see what the CAN wires and DB control.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: August 26, 2014 at 9:57 AM / IP Logged  
[/QUOTE]
The same percentage/odds that your 2010 elantra is a 2011 model.[/QUOTE]
what you mean by that ???
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: August 26, 2014 at 10:14 AM / IP Logged  
you mean that my vehicle is 2011 ???
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: August 26, 2014 at 1:07 PM / IP Logged  
Guys, i am planning to make the installation with DBall2 ( as howie said ), and if this wouldn't work, i have to do it with out the DBall2 ( hardwire )
So, i study viper diagram and marked ( as long my knowledge ) all the wires i need to do this installation as below, i need a conformation from you guys.
1- H6/1      (+)12VDC CONSTANT INPUT        12v
2- H6/2      (-) CHASSIS GROUND      Ground
3- H6?3      (+) SIREN OUTPUT  Siren
4- H6/5      PARKING LIGHT OUTPUT
5- H10/2    RED / BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT 12v
6- H10/5    RED (+) FUSED 12V IGNITION 1 INPUT  12v
7- H10/6    GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL)        Starter KEY SIDE OF THE STARTER KILL
8- H10/7    VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)    starter CAR SIDE OF THE STARTER KILL
9- H10/8    ORANGE (+) ACCESSORY OUTPUT    ACCESSORY
10- H10/9   RED / WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87    12v
11- H10/10 PINK (+) IGNITION 1 INPUT/OUTPUTIGNITION 1
12- H24/18 VIOLET (+) DOOR INPUT ???????
13- H24/20 BROWN (+) BRAKE SHUTDOWN INPUT brake wire
do i need a relay ?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 26, 2014 at 1:29 PM / IP Logged  
H2 Violet not needed you'll use the green but even then only if the DB doesn't work.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: August 26, 2014 at 1:37 PM / IP Logged  
howie ll wrote:
H2 Violet not needed you'll use the green but even then only if the DB doesn't work.
So, from your reply i noticed that these wires all i need, right?
what about relays ?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 26, 2014 at 1:40 PM / IP Logged  
No sir, don't even go there.
wissam1981 
Copper - Posts: 116
Copper spacespace
Joined: July 24, 2014
Location: Florida, United States
Posted: August 29, 2014 at 8:45 AM / IP Logged  
today, i tried the to hook up the viper with Dball2, with no luck
is there in this forum any case similar to my case ( no transponder ) with viper so i can figure out the hardwire of the viper and my vehicle ????
Page of 22

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer