the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

dnn990hd spontaneously rebooting


Post ReplyPost New Topic
< Prev Topic Next Topic >
jhruzek 
Member - Posts: 14
Member spacespace
Joined: January 18, 2007
Location: United States
Posted: August 06, 2014 at 9:13 PM / IP Logged  
Every once in a while the unit shuts itself off and reboots. It does it in all modes. No commonality to the times when it does so. It was professionally installed so I do not know how it was wired. Any thoughts on what to look for?
jhruzek 
Member - Posts: 14
Member spacespace
Joined: January 18, 2007
Location: United States
Posted: August 06, 2014 at 9:14 PM / IP Logged  
The unit is installed in my 2008 Audi S4 convertible.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 07, 2014 at 5:47 PM / IP Logged  
What is a dnn 990hd? It sounds very impressive.
And here are your answers:-
Internal software glitching
Power supply
Professionally installed? Then why are you posting here?
Take it back to the installers!
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 07, 2014 at 6:15 PM / IP Logged  
What kind of vehicle? What brand and model wiring harness did they use? Most common cause of your problem is the inability of the digital module to provide enough current to the deck. Solution is to have them connect the yellow wire of the deck to the other side of the digital module.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: August 07, 2014 at 6:20 PM / IP Logged  
08 Audi Craig = +, - and a pair of CAN Hi Lo at the H/Unit so either hard wire at the fusebox (no ACC) or as you suggest connect yellow wire to fusebox input.
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 07, 2014 at 8:17 PM / IP Logged  
If you are using the Pac-Audio C2R-AUDI, Have them connect the radio's yellow wire to the car side of the harness.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer