the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start / stop, 99 lexus rx300


Post ReplyPost New Topic
< Prev Topic Next Topic >
bobster0007 
Member - Posts: 49
Member spacespace
Joined: February 14, 2006
Posted: September 02, 2014 at 2:08 PM / IP Logged  
Take your unit's negative unlock output, split it with two diodes. One side goes to the unlock detection wire, and the other goes to the unlock wire.
( Above )Can someone tell me which way does the band on the diodes point when splitting?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 02, 2014 at 2:25 PM / IP Logged  
Away from the lock and lock detection wire.
bobster0007 
Member - Posts: 49
Member spacespace
Joined: February 14, 2006
Posted: September 02, 2014 at 6:47 PM / IP Logged  
Well I did as the guy said and once again nothing good for me. I only tried the unlock first which is rather simple. I connected the units unlock wire after splitting off via 2 diodes with the band toward the unit. One wire to the unlock wire and other to the lock detection wire. I hear the unit's relay click when i press the unlock button but no lock movement. I thought maybe the signal was too weak to trigger both wires so i physically grounded the wire on the side of the unit and the drivers lock sounded like it cycled but none others did and no door actually locked. This doesnt seem that complicated but i cant seem to make this work. Any other suggestions?
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: September 03, 2014 at 4:10 AM / IP Logged  
It takes two pulses to unlock all the doors.
When unlocking one shouldn't expect doors to lock.
bobster0007 
Member - Posts: 49
Member spacespace
Joined: February 14, 2006
Posted: September 03, 2014 at 7:08 AM / IP Logged  
Yes but the writing above claims to work as a priority system. Therefore 0ne pulse should unlock the drivers door.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 03, 2014 at 3:56 PM / IP Logged  
Not necessarily.
bobster0007 
Member - Posts: 49
Member spacespace
Joined: February 14, 2006
Posted: September 04, 2014 at 12:44 PM / IP Logged  
Ok I finally fixed it. Thanks for your help.
Page of 9

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer