clifford intellistart manual mode issue

Home / the12volt's Install Bay / Car Security and Convenience / clifford intellistart manual mode issue (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

benharry

Member - Posts: 8

Joined: August 19, 2014

Location: United Kingdom

Posted: August 20, 2014 at 5:33 AM / IP Logged

I will double check the brake wires later, as I'm now unsure if the 12v constant wire had been wires to the 12v switched that goes to neg when the brake is pressed and the other goes to the wire that goes to the brake lights, if this is the case would this stop the manual mode from working as it does work in auto?

Ben

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 20, 2014 at 5:36 AM / IP Logged

Not sure, it's about 3+ years since I was involved with the I/Start, been using/installing Viper 5X04 since then.

Where are you.

Back to Top

benharry

Member - Posts: 8

Joined: August 19, 2014

Location: United Kingdom

Posted: August 20, 2014 at 6:30 AM / IP Logged

I will double check the brake wires later, re-programme the tach and get back to you with my findings. I'm down in cornwall

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 20, 2014 at 6:31 AM / IP Logged

Shame, too far to have a look!

Back to Top

benharry

Member - Posts: 8

Joined: August 19, 2014

Location: United Kingdom

Posted: August 20, 2014 at 12:00 PM / IP Logged

I've checked the wires and immediately found that the brake wire didn't have a constant 12v, I connected it to a spare ignition live wire and hey presto it worked straight away :-D thanks for you input into this matter and hopefully this thread will be of help to someone else in need of help.

Kind Regards

Ben

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford intellistart manual mode issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.