the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bad amp?


Post ReplyPost New Topic
< Prev Topic Next Topic >
key67 
Member - Posts: 8
Member spacespace
Joined: September 06, 2014
Posted: September 07, 2014 at 7:18 PM / IP Logged  
did some reading on 4/3/2 amps and as it turns out 2 and 3 are always mono no matter what ya do, I popped it to 4 channel and now have seperation. Its ok to only have two speakers? turn the gain down on the channel not being used? bridge them and crank it all?
One thing that I did find broke was the bass by pass for the front , the pot just keeps turning, the rest of them didnt change anything in my ears though. For now, Im happy
key67 
Member - Posts: 8
Member spacespace
Joined: September 06, 2014
Posted: September 07, 2014 at 7:24 PM / IP Logged  
nvm the ?'s I got it figured now
thanks
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer