the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5706v remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
jbru 
Member - Posts: 5
Member spacespace
Joined: August 27, 2014
Location: Alabama, United States
Posted: September 08, 2014 at 10:14 PM / IP Logged  
is there any step by step intruction that i can fallow for this install? im trying to install it in an 03 acura tl
James Bru
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 09, 2014 at 1:42 AM / IP Logged  
No. Made to be installed by pros hence the lack of paperwork.
From the way you asked your question you'd be strongly advised to save money and have it installed by pros.
jbru 
Member - Posts: 5
Member spacespace
Joined: August 27, 2014
Location: Alabama, United States
Posted: September 09, 2014 at 1:09 PM / IP Logged  
i just see people do it on there own all the time. i just don't understand how the know exactly witch wire goes where
James Bru
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 09, 2014 at 1:17 PM / IP Logged  
Which is why I'm suggesting a pro install.
Have you you made a start?
Have you looked for any info in the Vehicle Wiring section?
Many people here unless they have vehicle electrics knowledge, testing, soldering, etc will end up paying fortunes to have their mistakes rectified, "painting by numbers" just doesn't work here.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: September 09, 2014 at 6:37 PM / IP Logged  
Howie is right, there is no paint by numbers for this stuff.
But here is some direction. Do your research. This is not a couple of hours job so plan on the entire weekend for this project. Test all of your wires before making any connections. The wiring guides are just guides, hence the need for testing.
Link to a wiring GUIDE:
http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
http://www.readyremote.com/main.asp?action=select&yr=26080&product=Remote%20Start&make=Chevrolet&model=Cruze#
Go to the downloads section of this site, find the install manual for the Viper 571. It has a section on finding the wires you need. You need to use a DMM, (Digital Multi Meter) for finding these wires.
Solder your connections.
Heavy gauge harness: Red, RED / White, and RED / Black to you 12 volt constant. Also the Red from the H1 harness to 12v constant.
Orange to your accessory wire, Pink/White to your accessory 2 wire if it applies.
Pink to your ignition wire.
Violet to your starter wire.
What bypass are you using?
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
jbru 
Member - Posts: 5
Member spacespace
Joined: August 27, 2014
Location: Alabama, United States
Posted: September 09, 2014 at 9:05 PM / IP Logged  
i'm using a xpresskit pkball. this is all for an 03 acura tl. i know how to soder and all that. its just take the wiring digram that viper gave and use car wiring diagram
James Bru
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: September 10, 2014 at 1:20 AM / IP Logged  
jbru wrote:
its just take the wiring digram that viper gave and use car wiring diagram
Yes? viper 5706v remote start -- posted image.
Not sure if that was a question.
jbru 
Member - Posts: 5
Member spacespace
Joined: August 27, 2014
Location: Alabama, United States
Posted: September 13, 2014 at 1:40 PM / IP Logged  
how do i test the wires before making any connections? just tie them up and see if it works properly?
James Bru
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 13, 2014 at 1:45 PM / IP Logged  
Use a DMM.
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: September 13, 2014 at 7:26 PM / IP Logged  
Read my above post on looking in the viper 571 install manual on finding the wires you need.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer