2012 lexus rx350, remote starter

Hi, I installed remote starter in a 2012 rx350 Push To Start. I used compustar and blade all. but I failed to program the remote which needs press and release button 15 times. Can I toggle 5 times to program remote on the bench and then bring it to the car? need to put to valet mode? another question is if it can cause any problem if I program remote with the blade which is already programed inside of brain.any advice is appreciated.

you can do it on the bench. just jump 12v to the green ignition wire 5x and leave it on to program the remotes then remove the 12v. you can program the remote with the blade in the module

thank you so much. I am done just now. it works well