ads-al-ca + avital 4103 + 2009 accord

Hey metz, was that in reference to the last question? I was told it was flashed to w2w. I originally tried to hook it up via d2d and was having difficulty. Everything is working except I'm unable to lock/unlock the doors/pop the trunk while the remote start is running.

It doesn't matter if it was flashed w2w. When it gets power for the first time. It should be flashing green 1 time or 2 times. You can change the mode from the module. If it's flashing 2 times it w2w. All you you do is push and release button. It should be flashing 1 time. That's d2d. Push and hold it should light up. Now it's off. Turn key in ignition light up solid green. Should be good to go.

If the locks work when the car is not running, it means you have the module set correctly. Typically, if the locks don't work when the car is remote started it means the installer didn't hook up the +starter input on the alca. Did you hook up the BLACK/ white on the module to the +starter wire in the car?

beegbie wrote: If the locks work when the car is not running, it means you have the module set correctly. Typically, if the locks don't work when the car is remote started it means the installer didn't hook up the +starter input on the alca. Did you hook up the BLACK/ white on the module to the +starter wire in the car?

I actually called iDataLink's tech support and was told to check that and it did indeed fix the problem. Thanks for the reply!