the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

98 civic viper 5601 no start


Post ReplyPost New Topic
< Prev Topic Next Topic >
jcrak_78 
Member - Posts: 4
Member spacespace
Joined: October 19, 2014
Location: New Jersey, United States
Posted: October 19, 2014 at 3:03 AM / IP Logged  
Hi guys, I'm having a problem with an install of a viper 5601.the car had a python 650 installed I used the same door lock, lights, ground, and siren wires. I then ram all the H3 harness wires. Everything for the alarm works fine, but when I try starting with the remote all I get is clicks from the "brain" but the car does nothing. If anyone has any prior experience with this and can help me out I'd appreciate it thanks in advance
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 19, 2014 at 6:28 AM / IP Logged  
List your connections and to where.
jcrak_78 
Member - Posts: 4
Member spacespace
Joined: October 19, 2014
Location: New Jersey, United States
Posted: October 19, 2014 at 10:49 AM / IP Logged  
Hey thanks here's what I have
main harness (H1)
RED / white going to blue/black on car
white going to RED / black on car
green Going to light GREEN/ red on car
brown to siren
Red (fused) to solid white at column harness
all above are tapped into harness that plugs into blue connector attached to fuse panel except siren and constant
Remote start harness (H3)
Solid red and RED / black go to solid white at column
Purple to left side of BLACK/ white at column
Green to right side of same BLACK/ white as above
orange goes to WHITE/ black at column
RED / white goes to yellow at column
Pink goes to BLACK / YELLOW at column
pink/white & pink/black go nowhere
Harness (H2)
Brown to GREEN / WHITE at brake
Gray to hood pin (not hooked up yet)
PURPLE / white going to tach wire at small plug by driver side corner of firewall
jcrak_78 
Member - Posts: 4
Member spacespace
Joined: October 19, 2014
Location: New Jersey, United States
Posted: October 19, 2014 at 12:29 PM / IP Logged  
Nevermind !!! Just found the problem... I never grounded the neutral safety wire. I did that and now it works fine
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 19, 2014 at 5:05 PM / IP Logged  
And your RED / white at H3 should also go to white, pink/white to yellow.
You beat me to the BLACK/ white!!
jcrak_78 
Member - Posts: 4
Member spacespace
Joined: October 19, 2014
Location: New Jersey, United States
Posted: October 20, 2014 at 8:47 AM / IP Logged  
Thanks for your time and expertise !

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer