wiring to input to one output

Home / the12volt's Install Bay / Relays / wiring to input to one output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

emmonsg

Member - Posts: 3

Joined: November 09, 2014

Posted: November 09, 2014 at 11:07 PM / IP Logged

I tried googling and i tired searching the forum however i haven't found my answer.

I am wiring my own LED DRL strip to my car. I want them to turn on when the dome lights turn on (when the car is unlocked) or when driving. What is the best way to do this with relays. I will be tapping in to the 12v from dome light and another 12v source.

Thanks in advance

Back to Top

emmonsg

Member - Posts: 3

Joined: November 09, 2014

Posted: November 09, 2014 at 11:08 PM / IP Logged

car is a 13' Subaru legacy

Back to Top

emmonsg

Member - Posts: 3

Joined: November 09, 2014

Posted: November 09, 2014 at 11:36 PM / IP Logged

I think I found my solution. I guess I wasn't using the right terminology. Please can someone confirm this will work...https://www.the12volt.com/installbay/forum_posts.asp?tid=78518

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring to input to one output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.