d2d between prostart and dball2

Home / the12volt's Install Bay / Car Security and Convenience / d2d between prostart and dball2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xcessiv46

Member - Posts: 8

Joined: November 03, 2014

Location: Quebec, Canada

Posted: November 18, 2014 at 8:50 AM / IP Logged

Dear fellow DIYers,

I never got D2D to work between my Prostart remote starter (acquired at Canadian Tire) and my DBALL2. I had to hook the wires directly.

Is this normal?

Thanks

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: November 18, 2014 at 3:10 PM / IP Logged

Yes. The Prostate units don't support D2D.

sparky

Back to Top

xcessiv46

Member - Posts: 8

Joined: November 03, 2014

Location: Quebec, Canada

Posted: November 19, 2014 at 9:42 AM / IP Logged

sparkie wrote:

Yes. The Prostate units don't support D2D.

Despite this being mentionned in the installation manual? :(

"Remote starters of this series have the ability to work in two way mode (D2D) with Xpresskit bypass modules"

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: November 19, 2014 at 12:44 PM / IP Logged

I have done quite a few Prostarts and have never gotten D@D to work. I always hardwire the bypass module. I haven't done one for a couple of years so they may have changed. Check to see if the bypass type is programmable in the programming menus. The Autostart versions of those modules are programmable for bypass type.

sparky

Back to Top

xcessiv46

Member - Posts: 8

Joined: November 03, 2014

Location: Quebec, Canada

Posted: November 20, 2014 at 8:10 AM / IP Logged

Ok thanks, will check!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

d2d between prostart and dball2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.