excalibur alarm, 2000 dodge ram

I am working on a 2000 dodge ram and need to wire in the alarm door lock/unlock wires. I know this is a 5 wire reverse polarity system. It also has a factory keyless entry system that controls the locks and dome light supervision. The question is; how do I wire this up? Can I use the relays in the keyless entry module to work with the alarm, or do I have to wire in separate relays? Does anyone have a wire schematic for this? Any help would be appreciated. Thanks!

Here is the Bulldog Security method for the locks :

http://diagrams.marktoonen.nl/DOWNLOADS/14301_RAM-FULL-SIZE-PICKUP-_RAM%20FULL%20SIZE%203-5%20WIRE%20DOOR%20LOCKS%20JBS%20UNITS.pdfThe top diagram will work with Excalibur systems that output (-) lock signals. 

You could use a DEI 451M module and wire it Type A for the Lock wire and Type C for the Unlock wire.  Here is a link to that install guide :

https://www.the12volt.com/installbay/file.asp?ID=726

Soldering is fun!

Thank you for your help!

Has anyone had an issue with the starter interrupt relay buzzing during remote start only?