avital anti-grind?

Hey, So I am going to try to make this easy to answer: Car: 2003 Alero NO alarm system RS System: Avital 4113LX one button (no security system). My question is, how on earth do I get this anti-grind feature working? The manual just says "use a relay". I have a standard SPDT relay, how would I wire up the anti-grind feature to it? Thanks in advance, Nate

Is this right?

You are close. Pin 86 should go to the pink (+) ignition wire in the ignition harness. So wiring would be: 85: Anti Grind from Remote start (can also use Ground When Running from Remote start). 86: (+) Ignition signal. Cut start wire in ignition harness. 87A: Key side of cut starter wire. 30: Motor side of cut starter wire. Cheers. Lectric Guy

I thought those cars had antigrind built in

Got it working. Thanks for your help guys!

pentavolvo wrote: I thought those cars had antigrind built in

Yes it does. I wired up the anti-grind relay and had everything ready.....then I read your post. Tried it. Turns out it won't grind the starter with the key or with remote start either. So for future people that may install this into a related GM car: THIS CAR DOES NOT NEED AN ANTI-GRIND RELAY.