2015 subaru legacy flashlogic issues

Home / the12volt's Install Bay / Car Security and Convenience / 2015 subaru legacy flashlogic issues (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dkaar

Member - Posts: 3

Joined: November 13, 2014

Posted: November 22, 2014 at 12:50 PM / IP Logged

The Flashlogic wiring information is incorrect for the 2015 Subaru Legacy. The attached file shows my situation. The IMMO Data wire is not there and the security light wire is incorrect. Can anyone lead me to the correct wires or on how to test the IMMO wire?

2015 subaru legacy flashlogic issues - Last Post -- posted image.

Back to Top

pentavolvo

Copper - Posts: 241

Joined: September 30, 2003

Location: United States

Posted: November 22, 2014 at 6:29 PM / IP Logged

I've given up on using flash logic on a newer subaru last 2 I did nothing matched and finally just did a key in box

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: December 02, 2014 at 9:12 PM / IP Logged

I am having the same issue......no immo data wire there.... did you get this vehicle done?

Back to Top

Search for other posts by shadowinfector

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 03, 2014 at 12:05 AM / IP Logged

usually the bcm/biu are upside down, while in the guide its other way around.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: December 03, 2014 at 10:13 AM / IP Logged

so i just finished the install, i went straight to the ecu on the passenger side, lower plug, pin 38 Data Bus - WHITE/ blue

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: December 03, 2014 at 10:15 AM / IP Logged

so i just finished the install, i went straight to the ecu on the passenger side, lower plug, pin 38 Data Bus - WHITE/ blue , on pzev vehicles there is NO wire at the plug on the tech sheet from idatalink. You need to go straight to the ecu on pass side engine compartment.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2015 subaru legacy flashlogic issues

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.