the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 f150 supercab reverse lights


Post ReplyPost New Topic
< Prev Topic Next Topic >
paulr1976 
Member - Posts: 9
Member spacespace
Joined: December 16, 2005
Location: United States
Posted: November 30, 2014 at 8:08 PM / IP Logged  
Hi,
I was thinking about hooking up my extra alarm outputs to turn on my reverse lights from my remote fob on my viper 560xv. Would anyone on here know the location and color of the reverse light wire under the dash or kick panel area? Thanks in advance.
Paul
dman007 
Copper - Posts: 106
Copper spacespace
Joined: November 24, 2002
Location: Florida, United States
Posted: November 30, 2014 at 8:15 PM / IP Logged  
Well, without knowing what car you are talking about I doubt anyone here can help.   But what you can do is just remove the taillight and get the reverse light wiring directly from there. Then just look for the same wire in the drivers kick hopefully you will find the coresponding one.
DTS Performance
St Petersburg, FL
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 30, 2014 at 8:22 PM / IP Logged  
2003 Ford F-150
Ween 
Platinum - Posts: 1,364
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: November 30, 2014 at 9:30 PM / IP Logged  
BLACK/ pink at central security module (underdash, near firewall, left of brake pedal), or rear view mirror (auto dimming type), or trailer tow reverse lamps relay. With the vehicle being a pickup (body on frame), the kick panel might not be an access point as the rear lighting wiring harness typically originates under the hood.
Ween 
Platinum - Posts: 1,364
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: November 30, 2014 at 9:36 PM / IP Logged  
http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0996b43f/80/24/74/92/large/0996b43f80247492.gif
Pin 12 is the reverse lamps input to the module.
paulr1976 
Member - Posts: 9
Member spacespace
Joined: December 16, 2005
Location: United States
Posted: December 01, 2014 at 6:12 AM / IP Logged  
Thank you all very much.
Paul

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer