the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2014 camaro, nav upgrade

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2014 camaro, nav upgrade (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 02, 2014 at 2:11 PM / IP Logged  
Hey guys I'm fitting a nav upgrade interface to a 2014 camaro as not many have been done I'm finding it hard to get info, any one know if can + and can - could be found in the back of the radio ??
tonanzith 
Gold - Posts: 593
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: December 02, 2014 at 2:20 PM / IP Logged  
Can Bus High     tan/black (high speed GMLAN)     data     data link conn or BCM above gas pedal, blue 27 pin plug, pin 24
Can Bus Low     tan (high speed GMLAN)
Gary Sather
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 02, 2014 at 2:32 PM / IP Logged  
2014 camaro, nav upgrade - Last Post -- posted image.
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 02, 2014 at 2:33 PM / IP Logged  
Can it be found in one of these plugs or only bcm
tonanzith 
Gold - Posts: 593
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: December 02, 2014 at 2:38 PM / IP Logged  
I don't believe it can be found at the radio. But if they can they would be the same color and a twisted pair of wires at one of those plugs.
Gary Sather
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 02, 2014 at 3:11 PM / IP Logged  
Oh ok then so the tan/black high speed is in the blue plug and low is tan in the same plug at bcm
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 02, 2014 at 3:14 PM / IP Logged  
Which is easier data link plug or bcm?? I know the bcm is on LHs above steering there is Afew different colour plugs I think blue was the 3 plug correct me if I'm wrong
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: December 03, 2014 at 9:59 AM / IP Logged  
Avoid OBD ll unless the colours are the same. Wiring to that socket can cause error codes when a dealer reads it = $$$
kanem84 
Member - Posts: 6
Member spacespace
Joined: December 02, 2014
Location: Australia
Posted: December 04, 2014 at 5:20 PM / IP Logged  
Ok so for for can high and can low for screen side and main side no one is sure where it is??

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer