crossover settings

Home / the12volt's Install Bay / Car Audio / crossover settings (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

flm09

Member - Posts: 26

Joined: September 17, 2014

Location: British Columbia, Canada

Posted: December 09, 2014 at 10:14 PM / IP Logged

My Pioneer head unit has built in subwoofer crossover so in that case is it better to turn the amp crossover to full setting & just use the deck crossover? Worried using two crossovers will over process the sound. Is that true?

Thanks!

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: December 13, 2014 at 10:17 AM / IP Logged

Yes, you don't want to use two crossovers in the same band. Setting your amp crossover to full or disabled is correct if you want to use the head unit crossover.

Support the12volt.com

Back to Top

flm09

Member - Posts: 26

Joined: September 17, 2014

Location: British Columbia, Canada

Posted: December 13, 2014 at 10:25 AM / IP Logged

Thanks very much!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

crossover settings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.