how to wire door lock actualtor from scra

Home / the12volt's Install Bay / Car Security and Convenience / how to wire door lock actualtor from scra (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

two12

Copper - Posts: 84

Joined: November 24, 2009

Posted: January 19, 2015 at 8:02 PM / IP Logged

hi,

I have a good working, spare actuator from an '88 GMC Truck (two wires) that I would like to install into an RV side door.

what type of relays set-up do I need to make this work? the factory GMC manual shows a module, I dont have one but I have a bunch of std. relays.

thanks

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 19, 2015 at 8:11 PM / IP Logged

Here is a diagram : https://www.the12volt.com/doorlocks/page3.asp#arp ( use the top diagram )

You will need two relays and an inline fuse holder with 15 Amp fuse. The (-) Lock and Unlock inputs can be from a momentary switch or the output of an aftermarket RKE or similar system system.

Soldering is fun!

Back to Top

two12

Copper - Posts: 84

Joined: November 24, 2009

Posted: January 19, 2015 at 8:30 PM / IP Logged

thanks Kreg357 that should do it and Im glad it only need two relays.

now I need to figure out how to make the autopage control it, should be in the manual I have for it but I may have a question or two about that later.

thanks.

Back to Top

two12

Copper - Posts: 84

Joined: November 24, 2009

Posted: January 20, 2015 at 7:28 PM / IP Logged

need more help..

I wired it up to the alarm like this:

how to wire door lock actualtor from scra -- posted image.

using the bottom diagram (adding actuators)

it works with the alarm just fine but when I add the momentary switches to un/lock manually (momentary ground) it doesnt work, it doesnt do anything where as before I wired in the alarm it worked.

not sure whats going on?

thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to wire door lock actualtor from scra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.