the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Is a 96 GMC Sierra a 5 wire door lock?


Post ReplyPost New Topic
< Prev Topic Next Topic >
rmtphan 
Member - Posts: 14
Member spacespace
Joined: February 18, 2003
Location: United States
Posted: August 12, 2003 at 11:34 PM / IP Logged  
I'm trying to find out if I have to do a 5 wire door lock relay with the GMC Sierra 96.  If so where do I find the motor and the switch wire for lock and unlock.  I think it's in the kickpanel but i'm not sure.  Thank you .
elrayodesinaloa 
Copper - Posts: 120
Copper spacespace
Joined: April 28, 2003
Location: United States
Posted: August 13, 2003 at 12:29 AM / IP Logged  

actually is a reverse polarity you need a couple of relays to make it work. The wires are by the kick panel white and lt. blue

30 motor side

87a switch side

85 and 87 to a fused 12v supply

86 signal from alarm

do it for both lock and unlock cut the wire and install the relay as shown.

rmtphan 
Member - Posts: 14
Member spacespace
Joined: February 18, 2003
Location: United States
Posted: August 13, 2003 at 12:33 AM / IP Logged  

So I'm suppose to cut the White and Lt. blue wire?

elrayodesinaloa wrote:

actually is a reverse polarity you need a couple of relays to make it work. The wires are by the kick panel white and lt. blue

30 motor side

87a switch side

85 and 87 to a fused 12v supply

86 signal from alarm

do it for both lock and unlock cut the wire and install the relay as shown.

elrayodesinaloa 
Copper - Posts: 120
Copper spacespace
Joined: April 28, 2003
Location: United States
Posted: August 13, 2003 at 3:28 PM / IP Logged  
yes
CutDog504 
Silver - Posts: 637
Silver spacespace
Joined: May 14, 2002
Location: Louisiana, United States
Posted: August 14, 2003 at 12:25 AM / IP Logged  
Be careful, make sure its five wire first! It can be either 5 wire, OR 3 wire positive pulse. If its a 2 door and came without factory keyless entry, then it will be 5 wire. But if its a 4 door crewcab, or if it DID come with factory keyless entry, then it will be 3 wire positive pulse.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer