hello i am in need of a wiring diagram for a 2004 honda accord.  also i need information on the vats system for this year can any one help?  also which dei module will work?  thank you.

Its interesting that I saw your post.  I was at installer.com 2 minutes ago looking for a diagram for my 04 accord.  Here is the link: http://www.installer.com/cars/honda.html 

Do you have plans for a system yet?  Im going to order the metra T2 dash kit so I can install my afermarket HU.  Hopefully I can get some information about taking out the factory components so I can install my new set.  Im not to sure about installing the amps at this point.  I cant find any information on the car really.  Ive been looking for a shop manual but have been unsuccessfull. 

Do you have any info about removing the factory stereo, front speakers, a good ground for amps?  I know the gas tank is right under the trunk, but not to sure where exactly...I dont need to drill into that.  

Z

*1 - These wires will meter using the passenger door  lock switch.

*2 - The ECM/PCM is on the front of the transmission tunnel. The connectors are on the passenger side. On the 4 cylinder models the tach wire is in the WHITE 31 pin connector E, pin 25.  On the 6 cylinder models it is in the GRAY connector A, pin 23.