the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

push start


Post ReplyPost New Topic
< Prev Topic Next Topic >
CelicaGTi 
Member - Posts: 14
Member spacespace
Joined: November 17, 2004
Location: United Kingdom
Posted: November 18, 2004 at 7:42 PM / IP Logged  
I want to completely remove my ignition barel and convert it to push start. Anyone got any idea of what i need to do to achieve this. I am not worried about not needing a key to start the car as I have a clifford Avant guard alarm. At a guess i need a switch to turn the 12 volt feed on and then a button to crank the engine. Does anyone do a switch that goes from off--> feed 1 on--> feed 1 & 2 on. Aslo what current rating would the switch need? any help with this would be appreciated!!
kidtransam 
Copper - Posts: 99
Copper spacespace
Joined: November 08, 2002
Location: United States
Posted: November 18, 2004 at 8:35 PM / IP Logged  
you could do it with a small switch, and just use relays.one relay to trigger ignition, and the other to trigger the starter
With a torch and a big enough hammer...it WILL friggin fit!!
CelicaGTi 
Member - Posts: 14
Member spacespace
Joined: November 17, 2004
Location: United Kingdom
Posted: November 18, 2004 at 10:33 PM / IP Logged  
what sort of relays do i need
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: November 18, 2004 at 11:09 PM / IP Logged  
May be a stupid question with you name and all, but what is the vehicle?
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
CelicaGTi 
Member - Posts: 14
Member spacespace
Joined: November 17, 2004
Location: United Kingdom
Posted: November 18, 2004 at 11:13 PM / IP Logged  
1991 celica GTi16
forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: November 19, 2004 at 1:37 PM / IP Logged  
Push start buttons are readily available from Ignited Performance.
Top Secret, I can tell you but then my wife will kill me.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 19, 2004 at 5:40 PM / IP Logged  
Rob's got it right. Use the Ignited kits and you won't go wrong. We've installed thse kits into alot of vehicles locally and they all work great and are universal application kits.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
overworked 
Copper - Posts: 133
Copper spacespace
Joined: November 09, 2004
Location: Australia
Posted: November 19, 2004 at 11:45 PM / IP Logged  
how do those kits go with a steering lock that activates when wheel is turned?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 20, 2004 at 3:03 AM / IP Logged  
You still have to use your key to turn the ignition switch over to the ON position so you will need to unlock the steering column to do this.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
overworked 
Copper - Posts: 133
Copper spacespace
Joined: November 09, 2004
Location: Australia
Posted: November 20, 2004 at 6:04 PM / IP Logged  
is there anyway around it? what if you remove the barrel altoghter?
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer