2004 350z remote start

I am looking for the wiring code for a 2004 350z Touring with remote start.

Any help would be greatly appreciated.

12volt-WHITE/ blue    at harness

starter-WHITE/ red at harness

2nd starter-WHITE/ green  at harness

ignition-BLACK/ red at harness

acc-WHITE/ black  at harness

lock-red -drivers door module in door

unlock-lt blue(double pulse)

parking lights(+)-RED / blue-drivers kick

door trigger-white(L) pink(R)white plug at bcm in drivers kick

tach-not black or WHITE/ blue at coil

brake-pink/blue at switch

parking brake-purple(-) at switch

horn(-)GREEN/ black-at column

transponder based security needs a bypass 555-u

hope it helps

MECP Master Installer

It is a universal bypass for any car. You can get it at any install shop. You need this for remote start. When you get the unit there will be a wiring diagram.  Its easy but you need to give up a key to put in the unit. I suggest that you cut the key so someone cant dig in your dash and take off with your car. The unit is very basic I think it has a ignition input, ground out when running input. It comes with a coiled wire that you put over the key cylinder that will mimic your key in the ignition for remote start.