dome light on filp down screen

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / dome light on filp down screen (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dexinefx

Member - Posts: 32

Joined: May 31, 2002

Location: United States

Posted: January 03, 2005 at 2:53 AM / IP Logged

I installed a bravo flip down monitor with a built in dome lights. the monitor has three wires: a red, RED / black, and black...I hooked it up on my 04 accord but it doesn't work with the doors only when it is on the "on" position... help please...

Back to Top

kidtransam

Copper - Posts: 99

Joined: November 08, 2002

Location: United States

Posted: January 03, 2005 at 3:18 PM / IP Logged

If the unit is powered all together with the dome lights..you cant run it off of the door trigger, unless you go into the unit and seperate the dome lights....if the dome lights have seperate wires just for them, then just ground the black and grab your positive at the courtesy light ,or overhead dome light.

With a torch and a big enough hammer...it WILL friggin fit!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light on filp down screen

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.