Hi Everyone,

My car is 1995 Japan-made Toyota Camry LE V6 4 door with factory power door locks. I want to install a 2-wire aftermarket door lock actuator to replace the broken one in front driver door. How should I connect the 2 wires of aftermarket door lock actuator?

I saw 2 groups of wires going to the actuator area in front driver door. One group has 4 wires and the other group has 3 wires. What are the functions of these 7 wires? Which wires actually activate the actuator?

The following is what I found out about these 7 wires:

AT ACTUATOR     INTO KICK PANEL?          UNLOCK     LOCK     At Rest

Black wire     Blue/Black stripe          12v     0.25v     0v
Red          Blue/Red Stripe               0.25v     12v     0v
White          Blue/Red Stripe (smaller)      3.6v     3.6v     3.6v
Blue          White/Black Stripe          0v     0v      0v
                & Brown dot

Black          White/Black Stripe          0v     0v     0v
Red          Blue/White stripe          11.5v     11.5v     11.8v
Green          Blue/Brown stripe          11.5v     11.5v     11.8v

Please advise how I should connect the 2 wires of aftermarket actuator (without adding any additional relays)?

Thank you for all your replies.

Hi Guest

Not a member?
Register

Already a member?
Sign In

thepencil

Silver

Joined: December 16, 2002
Location:
Canada
Posts: 1,529

Posted: March 30, 2005 at 9:22 PM - IP Logged

I just did one last week. Go into the door to the wire is the easiest. The white plug with the group of four wire is the correct set. I don't remember the wire colour. The one below seem to the most correct. Just test them. No relay are need. Very simple to do when you get the correct wire. Once you get the correct wire just connect them to the aftermarket actuator.

"Black wire Blue/Black stripe 12v 0.25v 0v
Red Blue/Red Stripe 0.25v 12v 0v "

___________________________________________
Be careful whose advice you buy, but be patient with those who supply it.

the12volt's install bay / Car Security and Convenience

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Custom Search


Thursday, July 29, 2010	•	Copyright © 1999-2010 the12volt.com	•	Donate to the12volt.com	•	Privacy Policy	•	Advertising

Basics • Car Audio • Car Security • Cruise Controls • Diodes • Door Locks • Ohm's Law • Passive Crossovers • Relays • Resistors • Subwoofer Enclosures

Application Guides • Calculators, Charts, Diagrams • Downloads • Find Installers • Forums • Glossary • Subwoofer Wiring • Tools • Vehicle Wiring

Active Forum Topics

It appears that you are using an older browser or your browser does not support JavaScript, or you have it disabled. This site takes advantage of newer features. High Color or better, and a 6.0 browser or the latest version is required with JavaScript and Style Sheets enabled. Don't miss out!

the12volt's install bayMobile Electronics Forums

Topic: 1995 Toyota Camry Door LockActuator ( Topic Closed)

the12volt's install bay
Mobile Electronics Forums