Viper 550ESP (Maxima 2003)

Home / the12volt's Install Bay / Car Security and Convenience / Viper 550ESP (Maxima 2003) (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ssmithmax03

Member - Posts: 4

Joined: December 10, 2002

Location: United States

Posted: December 10, 2002 at 3:42 PM / IP Logged

Newbie here needing some info please. Going to be installing my Viper 550 on new 2003 Maxima. Anyone have the wiring diagram??? Also, been told the door locks have to be isolated with diodes for the keyless (???) Saw the diagram for the 2002, wondering if it's the same. Also will need wire color for factory disarm at the SECU, didn't see it listed. Thanks for the help.

Shane

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: December 10, 2002 at 4:30 PM / IP Logged

i would think the 03' would be the same, i know on the 02' i didnt have to isolate anything with the lock wires. only thing my techsoft lists is a disarm defeat (GREEN/ YELLOW) at the SECU module, which is located on the passanger side of the steering column, and that wire should be in pin 56. hope this helps

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: December 10, 2002 at 6:48 PM / IP Logged

Nissan

Maxima

2002

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		BLACK/ WHITE & BLACK/ BLUE	IGNITION SWITCH HARNESS , *
Ignition #1:		BLACK/ RED (SMALLER)	IGNITION SWITCH HARNESS
Ignition #2:		RED / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:		N/A
Accessory:		WHITE/ BLUE	IGNITION SWITCH HARNESS
Brake Light:		RED / GREEN	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:		WHITE/ GREEN	IN WHITE PLUG BEHIND INSTRUMENT CLUSTER ***
Parking Lights:		RED / BLUE (+)	DRIVER'S KICK PANEL *****
Headlights:		GREEN/ YELLOW & BLUE/BLACK (-)	AT HEADLIGHT SWITCH ****
OEM Alarm Disarm:		DISARMS WITH UNLOCK
OEM Alarm Arm:		ARMS WITH LOCKS
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This Vehicle Is Equipped With A Transponder Type Engine Immobilizer Theft System. See Installation Note #144 - Bypassing Transponder Theft System. This Vehicle Is Equipped With Two Start Wires. Both Must Be Powered In Order For Vehicle To Start When Engine Is Cold; See Note #251 - Nissan Starter Wires Diagram. * DO NOT START ENGINE WITH INSTRUMENT CLUSTER UPLUGGED!

Nissan

Maxima

2002

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		GREEN	IGNITION SWITCH HARNESS
Starter Kill:		BLACK/ WHITE & BLACK/ BLUE	IGNITION SWITCH HARNESS , *
Ignition +12 Volts:		BLACK/ RED (SMALLER)	IGNITION SWITCH HARNESS
Dome Lights/Superv:		SEE NOTE BELOW ******
OEM Horn:		GREEN / WHITE (-)	STEERING COLUMN HARNESS
Power Lock:		ORANGE / BLACK (-)	DRIVER'S DOOR MODULE *******
Power Unlock:		ORANGE / BLUE (-)	DRIVER'S DOOR MODULE *******
Trunk Release:
Alarm Input Wire:		SEE NOTE BELOW ******
Notes:	A Key In The Driver's Door.

I don't know the '03 is the same or not. Here is the diagram. Good luck.

ssmithmax03

Member - Posts: 4

Joined: December 10, 2002

Location: United States

Posted: December 10, 2002 at 7:17 PM / IP Logged

Appreciate it guys. Making a small change. Figured out the keyless will arm and disarm with the motor running and key in the ignition. Going to install the 551R instead and keep factory remotes. Wasn't really interested in the alarm part anyway. I hope the disarm defeat wire is the alarm disarm so when I hit the door locks twice to start it will disarm the factory alarm. Anybody know for sure???? Thanks for all the help guys. If this all works out, I'll post all locations and wires needed.

Thanks,

Shane

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: December 10, 2002 at 7:19 PM / IP Logged

you mean the 551t the 551r has its own remote and is a keyless entry system.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

ssmithmax03

Member - Posts: 4

Joined: December 10, 2002

Location: United States

Posted: December 10, 2002 at 7:39 PM / IP Logged

Oops!! Just realized mistake when i went to download install manual. Don't guess you know that factory disarm (color) wire ?????

Shane

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 550ESP (Maxima 2003)

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.