I am going to just add a resistor for a permanent bypass to my 96 Cavalier Passlock system.
In my book it shows 3 wires going to the 'passlock lock cylinder'
its shows MRD(+) is white, MRD(-) is black, MRD input is yellow
the white is 'battery', black goes to ground and one side of resistor, yellow is the other side of the resistor.
My problem is that all 3 of my wires from cyclinder to instrument cluster are black........except one of the wires has a white stripe. Would that be the white wire (MRD(+))?
I was going to cut the other 2 and measure resistance to see if I am correct, just thought I might as well check with you guys first.