2006 Subaru Outback Remote Start Wiring

Looking for wiring diagrams for the 2006 Subaru Impreza Outback Sport. I am installing a Auto start w/keyless entry and alarm. Model FM-870-TK made by Commando Vehicle security. Thanks

DEI shows: DIRECTWIRE™ WIRING INFORMATION - SUBARU / OUTBACK / 2006 / Remote Start [PRINT THIS PAGE] 12volts      white (50A)       +       ignition harness Starter      WHITE/ black       +       ignition harness Second Starter      N/A             Ignition      green       +       ignition harness Second Ignition      blue       +       ignition harness Third Ignition      N/A             Accessory      yellow       +       ignition harness Second Accessory      N/A             Keysense      BLACK/ white       +       ign harn or BIU, 28 pin plug, pin 7 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Power Lock      BROWN / white       -       dr kick or BIU, 35 pin plug, pin 15 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Power Unlock      BROWN / black       -       dr kick or BIU, 35 pin plug, pin 29 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Lock Motor      lt. GREEN/ YELLOW       5wi      dr kick or BIU, 35 pin plug, pin 7 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Unlock Motor      RED / green to lt. green       5wi      dr kick or BIU, 35 pin plug, pin 23 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Parking Lights+      orange       +       parking light switch Parking Lights-      BLACK/ white       -       lighting switch Hazards      green to PURPLE / black       -       sw or turn signal and hazard module Notes: The turn signal and hazard module is to the left of the steering column. Turn Signal(L)      blue / YELLOW       +       turn signal and hazard module Notes: The turn signal and hazard module is to the left of the steering column. Turn Signal(R)      RED / yellow       +       turn signal and hazard module Notes: The turn signal and hazard module is to the left of the steering column. Reverse Light      BROWN / yellow       +       passenger kick, harness to rear Door Trigger      see notes       -       BIU, 35 pin plug Notes: The LF door is blue/white in pin 19, RF door is blue/orange in pin 32, LR door is yellow in pin 31, and RR door is WHITE/ red in pin 18. Use all four wires and diode isolate each. The BIU (Body Integrated Unit) is to the right of the steering column. Dome Supervision      brown       -       BIU, 30 pin plug, pin 3 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Also found in the passenger side A pillar. Trunk/Hatch Pin      lt. GREEN/ black       -       pass kick or BIU, 35 pin plg, pin 17 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Hood Pin      N/A             Trunk/Hatch Release      WHITE/ black       5wi      pass kick or BIU, 35 pin plg, pin 22 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Power Sliding Door      N/A             Factory Alarm Arm      brown       -       dr kick or BIU, 35 pin plug, pin 3 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Factory Alarm Disarm      yellow/red       -       dr kick or BIU, 35 pin plug, pin 12 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Disarm No Unlock      see factory alarm disarm             Tachometer      pink to RED / white       ac       ECM, 35 pin plug, pin 22 or cluster Notes: The ECM is behind the glove box. On the 4 cylinder turbo models, the tach wire is in the 34 pin plug, pin 23. Can also go to a fuel injector under the hood and use the wire that is NOT blue/black (4 cyl), red (4 cyl turbo), or yellow/blue (6 cyl). Wait to start      N/A             Brake Wire      BROWN / white       +       brake pedal switch Parking Brake      gray       -       sw or driver kick, harness to rear Horn Trigger      red to RED / white       -       switch or BIU, 30 pin plug, pin 11 Notes: The BIU (Body Integrated Unit) is to the right of the steering column. Memory Seat 1      N/A             Memory Seat 2      N/A             Memory Seat 3      N/A             Interface Module:      Category: Immobilizer Bypass      Required: Yes      Type: Transponder Part #: 556UW Alternate Part1 #: DesignTech 20402 Alternate Part2 #: DesignTech 29402 Notes: Standard on all models. Smart Starter Kill Relays: Not Available warning       This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed Electronics assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.