2007 Toyota Tundra security diagram

 Does anyone have the wire diagrams for a Toyota Tundra 2007? Im going to install a security system that has keyless entry, remote start, and security. I just dont have the wiring info for the truck. Thanks in advance!  Thomas

 Im sorry- I made a mistake- I meant for a Toyota Tundra- 2006 Model not 2007. Sorry!:(

12volts                       wht/blue (40A), wht/red (25A)      +      ignition harness Starter                       BLACK/ white                                      +      ignition harness Ignition                       BLACK/ red                                      +      ignition harness Second Ignition               BLACK / YELLOW                                      +      ignition harness Accessory                       pink                                              +      ignition harness Keysense                       YELLOW /GREEN                                      -      ign harn or BECU, black plug, pin 22 Notes: Using the status output wire from the remote start to trigger this wire will disarm the alarm without unlocking the doors. The BECU (Body ECU) is above the driver kick panel, towards the firewall. Power Lock      see DirectFax document 1070            Power Unlock      see power lock            Parking Lights+                       green      +      driver kick, harness to rear Parking Lights-                               green      -      switch or BECU, white plug, pin 14 Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall. Door Trigger      blue/red (ajar indicator)      -      BECU, white plug, pin 1 Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall. The individual door trigger wires are also at the BECU. The LF door is gray/red, gray plug, pin 15. The RF door is lt. GREEN/ black, black plug, pin 8. The LR door is RED / white, gray plug, pin 16. The RR door is RED / white, black plug, pin 4. Use all four wires and diode isolate each. Dome Supervision                  blue/black      -      ignition key cylinder illumination Notes: Also found at the BECU, gray plug, pin 8. The BECU (Body ECU) is above the driver kick panel, towards the firewall Hood Pin                                  blue/white      -      pin sw. or BECU, white plug, pin 5 Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall. Tachometer                          black             ac      ECM, 2nd plug from right, pin 1 Notes: The ECM (Engine Control Module) is behind the glove box Brake Wire      WHITE/ red or GREEN / WHITE      +      brake pedal switch Parking Brake                    lt. GREEN/ red      -      switch or BECU, black plug, pin 3 Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall. Horn Trigger      BLACK / YELLOW      -      switch or BECU, black plug, pin 21 Notes: The BECU (Body ECU) is above the driver kick panel, towards the firewall. This is for the doorlocks http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdfSeth Alvo     NY

Mobile Electronics Installer

The above diagram is for the 4 door only. The 2 door and ext cab are very different. Which do you have?Mike M2

Tech Manager

CS Dealer Services

 Mike Thanks alot! I have the 4 door- I think this will do! Thanks so much!!

ShaZAM.......