2008 ford escape wiring and bypass

I have one to do on monday....i'll get the info for you. For the module i'm gonna use a keyoveride sl2 by Fortin.

12 v blue/red at ignition harness (+)

ignition WHITE/ orange at same (+)

acc. violet/green at same (+)

starter  lt.blue/white at same (+)

brake violet/white at brake switch (+)

lock lt.blue /green at drivers kick (-)

unlock yellow/violet at same (-)

door trigger grey/violet at same (+)

lock motor grey/brown at same (+)

unlock motor lt. blue green at smae (+)

disarm defeat  violet/grey in drivers door sill where harness t's under drivers seat (+)

park lights violet /white at same (+)

I used the keyoveride sl2 by Fortin for the bypass, and the system was a ca-410a by code alarm, which works with the factory keyfobs.

Also, i didn't use a tach wire for the install, cuz the vehicle already has factory antigrind, but i'm sure the wire can be found at any fuel injector.

park lights